midium power transistors (80v / 1.5a) 2SCR554R ? features ? dimensions (unit : mm) 1) low saturation voltage, typically v ce (sat) = 0.3v (max.) (i c / i b = 500ma / 25ma) 2) high speed switching ? structure npn silicon epitaxial planar transistor ? applications ? inner circuit driver package tsmt3 code tl basic ordering unit (pieces) 3000 ? absolute maximum ratings (ta = 25 ? c) symbol limits unit collector-base voltage v cbo 80 v collector-emitter voltage v ceo 80 v emitter-base voltage v ebo 6v dc i c 1.5 a pulsed i cp 3a p d 0.5 w p d 1.0 w junction temperature t j 150 ? c range of storage temperature t stg -55 to 150 ? c *1 pw=10ms, single pulse *2 mounted on a recommended land. *3 mounted on a 40 x 40 x 0.7[mm 3 ] ceramic substrate. ? packaging specifications type parameter collector current power dissipation *1 *2 *3 tsmt3 (1) (2) (3) abbreviated symbol : nh (1) base (2) emitter (3) collector (1) base (2) emitter (3) collector (1) (3) (2) 1/5 2010.06 - rev.a www.rohm.com ?2010 rohm co., ltd. all rights reserved.
2SCR554R ? electrical characteristic (ta = 25 ? c) symbol min. typ. max. unit collector-emitter breakdown voltage bv ceo 80 - - v i c = 1ma collector-base breakdown voltage bv cbo 80 - - v i c = 100a emitter-base breakdown voltage bv ebo 6--v i e = 100a collector cut-off current i cbo --1 ? a v cb = 80v emitter cut-off current i ebo --1 ? a v eb = 4v collector-emitter staturation voltage v ce(sat) - 100 300 mv i c = 500ma, i b = 25ma dc current gain h fe 120 - 390 - v ce = 3v, i c = 100ma turn-on time t on -50-ns storage time t stg - 600 - ns fall time t f -60-ns *1 see switching time test circuit parameter mhz 300 - transition frequency f t - v cb = 10v, i e =0a f=1mhz - i c = 0.7a, i b1 = 70ma, i b2 =-70ma, v cc 10v conditions v ce = 10v i e =-200ma, f=100mhz -pf 10 collector output capacitance c ob * 1 * 1 * 1 ~ _ 2/5 2010.06 - rev.a data sheet www.rohm.com ?2010 rohm co., ltd. all rights reserved.
2SCR554R ? electrical characteristic curves (ta = 25 ? c) 0.00 0.10 0.20 0.30 0.40 0.50 0 0.5 1 1.5 2 collector current :i c [a] colector to emitter voltage:v ce [v] fig1. typical output characteristics 2.5ma 2.0ma 1.5ma 1.0ma 0.5ma 5ma ta=25 3ma 4ma 10 100 1000 1 10 100 1000 10000 dc current gain :hfe collector current :i c [ma] fig2. dc current gain vs. collector current( ) ta=25 v ce =5v 3v 1000 in :hfe fig3. dc current gain vs.collector current( ) v ce =3v 0.1 1 v oltage :v ce (sat)[v] fig4. collector-emitter saturation voltage vs. collector current( ) ta=25 i c /i b =50 20 10 10 100 1 10 100 1000 10000 dc current ga collector current :i c [ma] ta=125 75 25 -40 0.001 0.01 1 10 100 1000 10000 collector saturation v collector current :i c [ma] 0.01 0.1 1 1 10 100 1000 10000 collector saturation voltage :v ce (sat)[v] collector current :i c [ma] fig5. collector-emitter saturation voltage vs. collector current( ) i c /i b =20 ta=125 75 25 -40 1 10 100 1000 10000 00.51 collector current :i c [ma] base to emitter voltage: v be [v] fig.6 ground emitter propagation characteristics v ce =3v ta=125 75 25 -40 3/5 2010.06 - rev.a data sheet www.rohm.com ?2010 rohm co., ltd. all rights reserved.
2SCR554R fig.7 emitter input capacitance vs. emitter-base voltage collector output capacitance vs. collector-base voltage 1000 fig8. gain bandwidth product vs. emitter current 100 1000 p ut capacitance : cob(pf) t capacitance : cib(pf) ta=25 f=1mhz i e =0a i c =0a cib 100 1000 o n frequency :f t [mhz] ta=25 v ce =10v 1 10 0.1 1 10 100 collector out p emitter inpu t collector - base voltage : v cb (v) emitter - base voltage : v eb (v) cob 10 10 100 1000 transiti o emitter current :i e [ma] 4/5 2010.06 - rev.a www.rohm.com ? 2011 rohm co., ltd. all rights reserved. data sheet
2SCR554R ? switching time test circuit base curent waveform collector current waveform v in pw pw 50 s duty cycle ? 1% t stg i b1 i b2 90% 10% t on t f i c r l =7.5 ? i b1 i b2 i c v cc 10v ~ _ ~ _ r l =15 ? 5/5 2010.06 - rev.a data sheet www.rohm.com ?2010 rohm co., ltd. all rights reserved.
r1010 a www.rohm.com ? 2010 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in whole, is permitted without the consent of rohm co.,ltd. the content specified herein is subject to change for improvement without notice. the content specified herein is for the purpose of introducing rohm's products (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specifications, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. great care was taken in ensuring the accuracy of the information specified in this document. however, should you incur any damage arising from any inaccuracy or misprint of such information, rohm shall bear no responsibility for such damage. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. the products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, commu- nication devices, electronic appliances and amusement devices). the products specified in this document are not designed to be radiation tolerant. while rohm always makes efforts to enhance the quality and reliability of its products, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any product, such as derating, redunda ncy, fire control and fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of the prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospac e machinery, nuclear-reactor controller, fuel- controller or other safety device). rohm shall bear no responsibility in any way for use of any of the products for the above special purposes. if a product is intended to be used for any such special purpose, please contact a rohm sales representative before purchasing. if you intend to export or ship overseas any product or technology specified herein that may be controlled under the foreign exchange and the foreign trade law, you will be required to obtain a license or permit under the law.
|
